ISO IEC 9899:2018 pdf download

ISO IEC 9899:2018 pdf download.Wheelchairs Part 6 : Determination of maximum speed of electrically powered wheelchairs.
Maximum speed can be an important factor in the selection of the most appropriate wheelchair for individual people.
Maximum speed can have an influence on whether an electrically powered mobility device may be used on or off footpaths, or both, depending upon local legislation. Some people’s main concern may be to travel as fast as possible, whereas other people may be apprehensive of higher speeds. In addition, other tests in the Iso 7176 series may require the determination of maximum speed in order to carry out their procedures.
These tests specify a consistent method of determining maximum values of speed to provide comparable results.
Maximum speed can be an important factor in the selection of the most appropriate wheelchair for individual people.
Maximum speed can have an influence on whether an electrically powered mobility device may be used on or off footpaths, or both, depending upon local legislation. Some people’s main concern may be to travel as fast as possible, whereas other people may be apprehensive of higher speeds. In addition, other tests in the Iso 7176 series may require the determination of maximum speed in order to carry out their procedures.
These tests specify a consistent method of determining maximum values of speed to provide comparable results.
7 Test report
The test report shall contain the following information:
a) a reference to ISO IEC 9899, i.e. ISO 7176-6:2018;
b) the name, address and accreditation status of the testing institution;
c) the name and address of the manufacturer of the wheelchair; d) the date of issue of the test report;
e) the wheelchair type and any serial and batch numbers;
f) the total mass of the dummy used or, if a person is used, the mass of the driver and weights; NOTE The dummy mass includes the mass of any instrumentation attached to the dummy.
g) details of the set-up of the wheelchair as specified in Iso 7176-22;
h) a photograph of the wheelchair equipped as during the test;
I) the result of the test specified in Clause 6. Table 1 provides a recommended format for disclosure.ISO-IEC-9899-2018

Leave a Reply

Your email address will not be published. Required fields are marked *